Thanks for your reply.
Actually the problem was on the pin input setting, now everything is working properly. Thanks for the component so well written and explained.
Matteo, I wander if you able to run it in parasite mode? Can you please share experience.
Thanks also for this OneWire component and great forum example projects!
OneWire works without any problems on CY8CKIT-049-42XX. I have moved this component into a similar project and used the serial port only. The Cypress 'tidbit' was included for resetting the 049 board, using SW1 to place the board into bootloader mode, after SW1 is pressed for 2 sec.
how i can import new component?? i use psoc 3.1 sp3. help me, please. i started with CY8CKIT-059 PSoC 5LP
In Creator with your project opened: select in Workspace explorer window the Components Tab.
Then click right on Project and select Import Component.
See instructions video
I just started this, I don't have the files in the "generated source" folder, where can I get them?
I am not sure what the question about. The "Generated source" folder should not be of any concern.
To add component to the project, please (1) download the library DS18x8.cylib.zip from the previous post and unzip it in any folder of your choice. (2) Open your project (or the demo project provided with the library). (3) follow this 1-minute video tutorial on how to add the library to the project (Project->Dependencies->Add...).