This content has been marked as final. Show 5 replies
Yes George , we have a Bootloader host application which can be found in the PsoC creator Folder. For me it is in
C:\Program Files\cypress\PSoC Creator\1.0\PSoC Creator\bin \bootloader_host.exe. The PSoC3 I2C bootloader Application note will be available in the website in a few days.
Attached the draft version of the App note for your reference . This will guide you how to use the I2C bootloader.
Thank you so much for your answer!
I have read your application notes, you said "It is possible to have your customized bootloader project containing other communication components installed for other purposes". How to make a UART communication based bootloader?
Currently, if UART component is placed, you can not choose it from the tab .cydwr;>"system"->"bootloader"->"IO component", it is blank.
The bootloader only supports I2C at this time. What Anu meant is that you can place an UART in your bootloadable project for other applications other than bootloader.
The application note is very good. I was able to successfully create a bootloader and run it under 15 minutes. PSoC3 bootloader is really cool.
Here is a quite nice place!
Thanks a lot,