9 Replies Latest reply on Dec 8, 2016 7:47 AM by mifo

    Murata SN8200 module doesn't respond after 2-3 days ?

    nileshbhadule

      Hi,

       

      I am using Murata SN8200 module and SDK 2.4.0.

       

      1. I have made Murata SN8200 module as TCP Server.

      2. After connecting to access point, i keep sending Poll command from any PC (which is in same network).

      3. To send the poll frame from PC to SN8200 module,

         -- PC makes TCP socket connection.

         -- Sends Poll command to SN8200 module.

         -- SN8200 module gives the responds to poll command.

         -- Then PC disconnects socket connection.

         -- This poll command is send periodically every 5 seconds.

       

      Problem Occurred:

      After running above functionality for more than 2 days, SN8200 module has stopped responding to poll commands.

       

      Debugging done:

      1. I tried to ping SN8200 module but it didn't respond.

      2. I switched off wifi router(access point) and after some time again powered up. Again tried to ping SN8200

         module but it didn't respond.

       

      What could be reason for SN8200 module has stopped responding after running for more than 2 days??

       

      Thanks,

      Warm Regards,

      Nilesh.