Hi Frank Buss,
You can contact the Local Cypress Sales Office for Samples of PSoC5. Engineering Samples will be available.
The part available on the kit is CY8C5588AXI-060 ES1 (Engineering Sample 1).
Thank's, I'll try it.
I have DVK -001 , but it is not working (may be fault in voltage regulator both 3.3v aand 5 v). Is it possible to get DVK only without any sample from local cypress office? or is it possible to repair my kit. if it so please give me details.
It is necessary to find out the reason why you are not able to use the kit.
The problem may be in the kit, or the processor module, or may be you are missing out something trivial which might have gone unnoticed.
I am assuming this is a PSoC 3 processor module you are working with. If so you can upgrade your sampled silicon for production version silicon at www.cypress.com/go/psoc3kitupgrade
Let me know how that goes?
I am working in Technical Institutes in Vietnam. I have used PSoC in my project for alot years, but i only used PSoC Family CY8C29666. I Know Cypress have developted Family PSoC 3, PSoC now today. Can I get sample some PSoC 3 from cypress to develope for my project, i am reseaching a project about detect gas and i think PSoC 3 appropriate. However, i nevertest for PSoC 3. I know PSoC 3 have alot of charaterize !my Address: Dang Vo Cong, Technical Institutes, 129 Hoang Van Thai street, Thanh Xuan district, Ha Noi city, Viet Nam.
Don't forget you need to have the new psoc miniprog3 for programming and debugging.:-)
from my own experience I would suggest to by a KIT001-board. It contains processor modules for PSoC1, 3 and 5 which are interchangeable on a motherboard equipped with an LCD-Display, Capsense-buttons and... and...
Debugging features with no (zero) additional hardware for PSoC 3 and 5, ICE-Box support for PSoC1.
So there's nothing left to whish for!!!
You can also look for PSoC 030 kit for analog development in PSoC3
You can use kit CY8CKIT-050 or CY8CKIT-001.
If you only want a chip most distributors will sample a chip, contact them.
Or contact Manufacturers Rep, they also typically will supply samples.