- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Guys,
There is a bug in the handling of the GPIO interrupts in the SDK 1.2.
You need a library patch to fix this issue. I don't think I can share the new SDK build with the fix here.
So, Please create a tech support case to get the new SDK build.
Also, there is going to be one patch release in days time.
Thanks,
sai krishna.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Sai Krishna,
do you have more detailed information when the patch will be released? What means in days time?
thanks,
lumpi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Lumpi,
Most probably in a day or two.
Thanks,
sai krishna.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Is there any condition to satisfy to configure GPIO as valid rising/falling edge interrupts? If they are configured as High/Low level interrupts how long it should be in high/low level so that the interrupt is valid.
Thanks,
Kasthuri Rangan V
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am also observing the GPIO interrupt issues and I would appreciete an information when new SDK version will be available that fixes that bug.
Michal
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
SDK v1.2.1 is available on the following page:
http://www.cypress.com/?rID=57990
This one fixes the issues with GPIOs.
Thanks,
sai krishna.