14 Replies Latest reply on Aug 20, 2014 7:39 AM by eri.kev

    Using SIO ports on PSoC LP5

    eri.kev

       Using SIO ports on PSoC LP5.

         

      It appears all SIO ports (port 12) are used for LCD. Is this correct?

         

      Underlaying issue:

         

      Have an analog signal 0.45V-4.54V as input to AD converter, and AD converter range is set up to 0V-6.144V

         

      AD converter will not see anything above 3.354V. works fine below this voltage.

         

      Please advice.