Could you please let us know whether you are testing the project on pioneer kit or custom board?
Have you checked the Disconnect reason on UART?
i am using the CY8kit-042 BLE with the 022001-EVAL plugin board
on the uart the last event code is 40 decimal and previous to that is 66.
Daman_Aus Well I am not seeing your issue on my system. I Press the reset button and the Green Advertising green led comes on and then I open CySmart on my Phone and I get a 65 and then a 39 then a message that says Device Gap Connected then an Event code of 42 I didn't experience the time out you saw. Right now it has been on for over 2 minutes and the Blue led is on.
thanks for your feedback.
In CySmart, were you presssing the notify button to start receiving the notifications? I've found that the timeout would occur once i pressed this button. I'm assuming that this sends a write request that i wasn't responding to.
I've added code to respond to it, and now it works fine.
originally i thought notifications would already be enabled as that is how i set it up the CCCD in the component profile. Apparently that's not how it works.
thanks for your time, i appreciate it.