1 Reply Latest reply on Jul 5, 2010 12:01 AM by vvjoy.cp

    CY7C68013A : problem in detection

    tarun.makwana
              I have developed a board in which I have used EZ-USB FX2LP dveice CY7C68013A for data transfer from HOST PC to FPGA. I am facing problem in device detection on the host pc (Windows XP). As I connect the USB cable between CPU and the board on the computer there is no notification pop up for deveice detection. When I look into the device manager window the device pannel is getting refreshed continuously. I have checked all the voltage leves required on critical pins thoroughly as per the guideline provided in documents. Please assist in this regard.   
        • 1. Re: CY7C68013A : problem in detection
          vvjoy.cp

          您好:

             

             我用68013A-100这个芯片,想把端口配置成 ISO 传输模式,可是,配置寄存器EPXCFG之后,用你们的开发工具CONTROL PANNAL 中的GET PIPES,

             

          Pipe:  0   Type: BLK Endpoint:  2 OUT  MaxPktSize: 0x200
          Pipe:  1   Type: BLK Endpoint:  6 IN   MaxPktSize: 0x200

             

          没有找到想要的ISO传输模式的端口,请问这是怎么回事?如何配置,才能正常工作。

             

          谢谢您的浏览,期待您的回复。