2 Replies Latest reply on Aug 18, 2010 4:32 AM by dr.-ing..goetz.buller

    UART Communication

    bala.vignesh.jeyaprakash

      Hi,

         

      I am working with CY8C29466 to communnicate with a digital sensor through UART Communication. The sensor works with the following UART settings.

         

      - baud rate: 2400
      - data bits  : 7
      - stop bit    : 1
      - parity        : Even
      - Time out  : 1000ms.

         

      With the example UART code I have done the above settings with 8 data bits and tested in PC hyperterminal.

         

      How to configure the UART for 7 data bits?