Anonymous
Not applicable
Sep 07, 2011
03:40 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 07, 2011
03:40 AM
Port direction should be configured for PWM opertaion, although it is inherently output ?
Solved! Go to Solution.
Labels
- Labels:
-
PSoC 1
1 Solution
Sep 07, 2011
03:58 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 07, 2011
03:58 PM
Yes, the port direction has to be configured as output because internally it configures the registers accordingly. I can understand that this does sound like an additional step but this is the firmware for this device is written.
Best regards,
Pushek
2 Replies
Sep 07, 2011
03:58 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 07, 2011
03:58 PM
Yes, the port direction has to be configured as output because internally it configures the registers accordingly. I can understand that this does sound like an additional step but this is the firmware for this device is written.
Best regards,
Pushek
Anonymous
Not applicable
Sep 14, 2011
01:52 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 14, 2011
01:52 AM
Thanks for your help.
regards,
SOJAN