PSoC Creator 2 with CY8CKIT-050

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Dear all,

   

I am using the CY8CKIT-050 and just recently downloaded the Creator 2.0. Because I am using USB functionality I need to configure the XTAL with 24 MHz. Unfortunatly my Board has no Y3 Crystal assembled.

   

Can somebody please tell me if the board is prepared for the Y3 24 MHz Crystal or not? I tried to follow the PCB lines, but it looks like there are none connected to the pads.. ( If it is not a Multilayer-Board)

   

Thanks in advance,
best regards,
Thomas

0 Likes
2 Replies
HeLi_263931
Level 8
Level 8
100 solutions authored 50 solutions authored 25 solutions authored

Yes, it is prepared for the crystal. Look at http://www.cypress.com/?app=forum&id=2233&rID=56823 for a detailed documentation.

0 Likes
Anonymous
Not applicable

Thanks a lot, I also found the PCB Layout of the board, and on on inner plane there is the connection..

0 Likes