2 Replies Latest reply on Sep 22, 2014 10:40 AM by MuOr_1658816

    Linux Kernel 3.15 with BCM43362 (Murata Type ZX)

    MuOr_1658816

      Issue #1


      We are running Linux Kernel 3.15 with BCM43362 (Murata Type ZX) and the opensource driver with the firmware. MMC in the kernel is initialized with the Device Tree. When the driver module is inserted into the kernel and the SDIO is activated, we see the errors below. We are also getting similar errors when we are scanning.

       

      mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

      mmc1: queuing unknown CIS tuple 0x80 (6 bytes)

      mmc1: new high speed SDIO card at address 0001

      brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

      brcmfmac: brcmf_fil_cmd_data: Failed err=-23

       

      Issue #2

       

      When we scan, there are only 1-2 access points listed. We have a few devices picking up 10-12 APs. The WICED module is performing much better.