2 Replies Latest reply on May 18, 2012 2:34 AM by @zju.edu.cn.2

    Does someone have the TD_Init() code for autoout?

    @zju.edu.cn.2

      Does someone have the TD_Init() code for autoout?
      I configure the antoout mode as follows:

         

      ^&^&^&^&^&^&^&^&^&^&^&&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&
      Typically, a FIFO is configured for Auto-Out mode as follows:
      1. Configure bits IFCONFIG[7:4] to define the behavior of the interface clock.
      2. Set bits IFCFG1:0=11.
      3. Reset the FIFOs.
      4. Set bit EPxFIFOCFG.4=1.

         

      ^&^&^&^&^&^&^&^&^&^&^&&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&^&

         

       

         

      however,I send 1024 bytes with Cyconsole.exe , the out transfer are failed.

         

      I remember that in the AUTO-IN mode ,i set the AUTOINLENH:L. But in the AUTO-OUT mode, i can't find the relevant register.

         

      anyhow, does someone have the TD_Init() code for autoout?