0 Replies Latest reply on Mar 29, 2012 4:15 AM by userc_44187

    max length data and clk



      I´am using PSoC Programmer Version and MiniProg3 to program some different Cypress-devices (for example CY21534).


      The adjustment is:


      Programming Mode: Power Cycle


      Verification: ON


      AutoDetection: ON




      Protocol: ISSP


      Voltage: 5V


       I´ve a (made myself) universal "black box" with a 37pin-cable connection to my device (test-Vcc 3V3 or test-Vcc 5V, 8 ADC, 32 DI/DO, ... and the Miniprog3). The cable length is round about 20 inch. It´s not possible to abrigde the cable, because the "black box" is used for several products, for manuel test, for automated test with a robot, ...


      Is it possible to program without problems with a cable length 20 inch or more?


      If not, is it possible to modify the MiniProg3?