2 Replies Latest reply on Mar 30, 2012 8:16 AM by laim.maskey

    Boot firmware from eeprom and later download .img file

    laim.maskey

      Hi,

         

      Is it possible to load the FX3 firmware from an eeprom and then download a fresh firmware configuration using the .img format. I would like to configure the FX3 with a base configuration which is stored in an eeprom and on power up this firmware is loaded into the FX3. Then whenever the user runs up my custom software the latest configuration is downloaded into the Fx3  using .img. This was easy to do with the FX2 so it would be good if the FX3 also supported this feature.

         

      Sodafarl