Optimizing pin usage for analog signals

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Recently I had a discussion with a friend about PSOC, accuracy of ADCs and what has an impact on signla quality. PSOC allows routing of most signals to most pins, that is a great feature BUT I am sure there are pins that are better or others that are not as good to use for analog inputs.

   

Which pins should I use to get best results for the 20-bit ADC inputs?

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Yes, you're quite right! Have a look here http://www.cypress.com/?rID=40247 

   

Happy routing

   

Bob

View solution in original post

0 Likes
3 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Yes, you're quite right! Have a look here http://www.cypress.com/?rID=40247 

   

Happy routing

   

Bob

0 Likes
Anonymous
Not applicable

Yeap, that's it.

   

Thank you Bob.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

... and here is another one I've found http://www.cypress.com/?docID=31236

   
   

Bob

0 Likes