1 Reply Latest reply on Apr 19, 2012 4:47 AM by anand.srinivasan.asokan

    Does Control Center Support loading the firmware across multiple I2C EEPROM?

    jumpei.kochi
              Hi, Does Control Center Support loading the firmware(*.img) across multiple I2C EEPROM? I use five EEPROMs at 256Kbit. Their address are A<2:0>=b000/001/010/011/100. I performed this operation:"Program ->FX3 -> I2C E2PROM". After choose my firmware file, Control Center show "Programing of I2C E2PROM Succeeded". But I cannot boot from EEPROM. I checked datas in the EEPROMs. A<2:0>=b000 was written something. However, other EEPROMs were not written nothing. Best regards, Jumpei