- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI,
We are working on PSOC5 project and would like to make a release build of the project. however, it seems there is no way to change the build setting configuration to release. it is always in "debug(active)".
We modified the configuration setting to "release" and press OK, but when we re-open the build setting, it is still debug(active).
Would there be other setting we need to change?
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There is a "Build Configuration" toolbar on my main window showing "Debug" and can be switched to "Release". If you cannot see that toolbar, try to find it and make it visible. The setting made there persists even when closing and re-opening Creator.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There is a "Build Configuration" toolbar on my main window showing "Debug" and can be switched to "Release". If you cannot see that toolbar, try to find it and make it visible. The setting made there persists even when closing and re-opening Creator.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have no problem with another PSOC3 project, jsut cannot do that with psoc5 project.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
So, do you have the toolbar named "Build Configuration" activated? (right click into an empty space in the toolbar area and select it).
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I make the change in the project-> build setting tab. Shall try you way tomorrow.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The change in the Project-> build setting... dialog will allone not work, this dialog is only for changeing the settings, not for selecting between Release/Debug. The "active" is only informative. So you'll have to change the mode as described above.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am confused. So the build setting in the project->build setting tab is useless? What is the difference betwen that project-> build setting and the build setting toolbar as you mentioned? The strange thing is that I can use the project -> build setting with the psoc3 project.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Well, useless is not the correct word, the Project->build setting is the dialog to modify the SETTINGs. As an indicator you get the hint which of the configurations has been made active. In the dialog it is used to select the configuration you want to modify, not to select the configuration that is applied to your build-process. That is done in the toolbar.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello!
This is my fault - sorry. We noticed the problem a while back and determined a good way to remove the confusion. Unfortunately I failed to get the change included in the 2.0, or upcoming 2.1, releases. As soon as I get this hair shirt off my back, and recover from the flogging I so richly deserve, I shall make sure we do get it in the 2.2 release at the end of the year.
I attached a couple of pics of the new button in the Build Settings dialog (which effectively obviates the Configuration toolbar).
-- mgs
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content