I have some problem.
In order to load Firmware, I work as below.
1. Connect FX3 device. -> It displayed "WestBridge" at [Device Manager]
2. Install CYUSB driver.
3. Load Firmware. -> After loading FW, CYUSB driver is re-installed. (I don't know why re-installation the drvier)
- Why CYUSB driver was re-installed after loading FW?? [VID and PID is not changed.]
Please help me, if you know the solution about this.
What is the VID/PID being used?
Are you using a serial number?