1 Reply Latest reply on Jun 5, 2012 11:26 AM by anand.srinivasan.asokan

    OK to leave 3.0 RX/TX blocks unpowered if only using USB 2.0?

    steve.magnani

      Does anyone know if it is OK to leave the USB 3.0 1.2V supply pins (and associated logic powered by those pins) unconnected if the FX3 is to be used only for USB 1.1/2.0 communication? I didn't see anything in the datasheet or schematic design checklist (AN70707).

      Thanks,
      Steve