1 2 Previous Next 15 Replies Latest reply on Jul 16, 2012 6:06 AM by rama.sai.krishna.vakkantula

    Is that possible the CY7C68013 run a firmware larger than 8KB/16KB? How to compile large firmware code of the CY7C68013 under Keil C environment?

    yuan.gang

      Dear all,

         

      Is that possible the CY7C68013 run a firmware larger than 8KB/16KB? How to compile large firmware code of the CY7C68013 under Keil C environment?

         

      I want to control a LCD and a data acquisition unit by the 8051 of a CY7C68013. Due to a mass of functions for the LCD controlling, the code size of the fireware is larger than the allowed band of the Keil compiler (uVision4), which prompt that "Program Size: data=132.6 xdata=4464 code=5063, Target not created" when I build the project.

         

      As I know, there is only 8 KB code and data RAM in the CY7C68013. Is that possible the CY7C68013 run a firmware larger than 8KB/16KB? And how? How to configure the Keil project? Pls. give me some instructions step by step.

         

      Thanks a lot!

         

      PS: My hardware works well with smaller firmware and a 128 KB EEPROM 24LC128 is connected with CY7C68013  through the I2C. The target setting of my Keil project is shown in the attached figure.

        1 2 Previous Next