I have the same Problem. Is there any solution?
You will need to use the ISSP connector with a miniprog1 or miniprog3 or the CY3207 ISSP Programmer.
I forgot to mention that the firmware(hex file) for the Bridge is located in the installation directory.
I can´t finde the hex file. Can you give me the Name of the file and the exact location.
C:\Program Files (x86)\Cypress\Bridge Control Panel\1.4
Here is the path you should use (adapt the 1.0 to your version number):
C:\Program Files (x86)\Cypress\CY3240 USB-I2C Bridge Kit\1.0\Firmware\USBtoIIC\USBtoIIC\USBtoIIC\output\USBtoIIC.hex
The filename is "usbtoiic.hex" and should be under "C:\Program Files\Cypress\Programmer\3.1_\"
You should connect a MiniProg1/3 to the ISSP jumper (J2) on the CY3240 kit and program the above hex file using Programmer software.