I compiled under Imagcraft, Designer 5.2, compiled fine with one minor
Note I was asked to update 2 modules and I gave it permission, update
Note, this was a PSOC 1 design by the way. So compile and IDE was
Designer, not Creator (PSOC 3/5).
Project was analog mux buss for multiple sensors.
I need a PSoC 3 project any suggestion?
I had done the project attached, but It's not working, can you take a look?
Sorry, attached now.
The project for the accelerometer.
I couldn't attach a file...
My project, with accelerometer, has two inputs->Analog Mux->ADC DelSig->LCD.
Following my code, please take a look:
#define TAM 16
@rcmarques for accelerometer project u can refer to sample projects that comes with the psoc guide and in psoc creator
The PSoC5 FirstTouch kit (-14) has in its example projects some which use the on-board accelerometer. The switch from PSoC5 to PSoC 3 is rather easy. I suggest to download the project-files from here http://www.cypress.com/?rID=43674
You are always welcome!
@bob i think PSoC 5 First touch starter kit is now obselete according to cypress website so go for PSoC 003 first touch starter kit and develop projects on it
As a real "Start" the FirstTouch modules come in very handy. But they go out (obsolete) quickly as well, undergoing re-designs and whatever else.
To constantly beeing on the developer's side I would recommend a -001 or a -30 kit and providing the external hardware on a separate board connected to the kit. There is a Video from Dave van Ess (called "Pimp your Kit" one of the first PSoC Today episodes) which shows up how to improve a -30 kit, have a look at!
plz send me link for Pimp your kit webisode