7 Replies Latest reply on Aug 8, 2012 6:51 AM by user_14586677

    Wrong Pin count...

    srihari.s

      Hello ALL

         

      I used UART component, I kept the buffer size  for both tx and rx as 20. So internal interrupt is enabled .we can write the interrupt code in the UART_Int.c file right........

         

      But why does the component provide two interrupt pins to be connected. even though i have not enabled any of the interrupts. i have attached the screen shots..

         

      And second thing ,  i am using one LCD which takes 6 pins, one for RX and other pin for TX... on building the project the report file says that i have used 12 pins.....and allows me to use only 60 pins out of 72...... what is wrong ...

         

      i have attached all the screeen shots