2 Replies Latest reply on Sep 22, 2012 3:33 PM by JoMe_264151

    Toggling LED with Timer Interrupt

        Hi all,


         I am a beginner with PSoC 1. Having gone through many app note, i tried my first ever project in PSoC. My aim was to toggle an LED every 1s. Maximum possible configuration ( Vc1 divider= 16, vc2 divider= 16, vc3 (sourced by Vc2) =256 and timer period = 256) gave me 0.6 s . Since it is perceptible i continued as such. In my power Psoc  board an LED is connected to P1_5 . I configured those pins (initial value as 1) . when i programmed the Psoc my led kept on glowing(remaining in its inital value assigned)  no toggling. I have checked for declaration of interrupts and all. I couldnt find more mistakes with my knowledge.




      I have attached my project.


      Kindly help