CY8CKIT-030

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

In the DVK CDROM, schematic, and user manual, one cannot find what pins

   

on PSOC 3 UART is connected to. There is no table of pin assignments in user

   

manual, and schematic does not show relationship of pins on RS232 translator

   

to PSOC pins.

   

 

   

Via a painful open up an example project, one for Rx, another one for Tx, I can find

   

those pin assignments (assuming example project is correct), but not the other

   

UART pins, CTS......

   

 

   

So, the 4 pins for UART usage, what pins are they tied to on PSOC 3 DVK ?

   

 

   

Regards, Dana.

0 Likes
2 Replies
lock attach
Attachments are accessible only for community members.
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You have to connect your UART signals to P5 which has initially no connector soldered. In Dave's video "Pimp your Kit" is advised to solder some contacts to it.

   

 

   

Bob

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

Main reason for post is to attract attention to updating docs.

   

 

   

Regards, Dana.

0 Likes