2 Replies Latest reply on Nov 2, 2012 9:03 AM by krzysztof.sielewicz

    [CYUSB3014-BZXC] SSRX lane to the USB3.0 connector connection






      I have the following question to You: why in the FX3 Dev-Kit ( http://www.cypress.com/?rID=58321) high-speed lane SSRX P/N is connected to the USB3.0 connector in the reverse order? I mean that SSRX_M (FX3) goes to USB3.0 Connector PIN10 - SSRX_P (No.10: USB 3.0 signal receiving line (+)) and SSRX_P(FX3) goes to USB3.0 Connector PIN 9 SSRX_N (No.9: USB 3.0 signal receiving line (−)).




      Best regards,