Try the following command:
hex2bix -i -f 0xC2 -o ledcycle.iic ledcycle.hex
I tried it but it still doesn't enumerate.
Is the VID/PID generated with hex2bix 0x0547/0x2131? Also, for that example, does it use cysub.sys?
Ledcycle example does not enumerate at all. There is no USB part in that example. It just toggle the LEDs present on the DVK.
Try with some other example (Bulkloop) with the command that I have given you.
I have a similar problem with C2 mode. We have a hex file(firmware) that we used to load into the internal Ram by using software( C code in host OS) . Now we have tried to load it into an EEPROM (c2 mode). I have converted the hex file into an I2C file and then stored it on my eeprom. but the device does not get recognized by the computer. I will be glad to know if u have found a solution to this.
What is the size of the hex file? Also, what is the command used for converting hex to iic. Please post the full command line that was used to convert using hex2bix.