This covers mods in several boards to perform sleep measurements -
If you have the CY8CKIT-014, follow the guiding principles in the prior commented
application note. Eg. examine your schematic for loads that may alter your sleep
Thanks for the fast answer.
I'll try to bring the board CY8CKIT-014 with the instructions into sleep mode.
kHz crystal pins (P15 & P15) are used for accelerometer in the First touch kit. So you can not use RTC in that kit. But any low power projects with Sleep timer can be done on FTK. May be the power consumption will be litter higher than what you can observe in the -030 or -050 kits.