10 Replies Latest reply on Feb 21, 2013 7:47 AM by userc_39074

    how can I make uvc controlling at  host interface



      We are using a custom camera that is in conjunction with Aptina camera sensor  (UVC 1.1 compatible),


      we are trying to control the camera by changing values of a few camera registers through I2C at HOST side.


      The Aptina docements are read that they provide uvc control host interface,


      but at first we can not enumerate camera control endpoint in our c# application on WIN7 32bit. 




      Using an extension unit on the camera controller may be too  difficult to me at this time.

          it will be  greatly appreciated  if you guide  any tips or pointers on how to achieve this.