2 Replies Latest reply on Mar 1, 2013 3:29 PM by user_1377889

    Custom PSoC Board and MiniProg

    redentor.adolfo


         

      Hello Everyone,

         

      We're encountering problem right now regarding the communication between our custom board PSoC3(CY8C3866LTI-068) and miniprog3 programmer. We're unable to program our custom board. The project compiles properly, but when we try to program the device, we get a window asking about the target device and once we've tried configuring it through the target window. 

      Here's what happen.

      Using PSoC Creator v2.2:

      In the Select Debug Target window, our board responds back as "cortex m3" even though the part is an 8051 core.
      On clicking on the name of "Cortex m3" we got a message on the right side saying "this device is recognized. but PSOC creator does not support using it at this time"

      Aditi used miniprog3 on the PSoC eval board and she can successfully download the program. But when we use our board using miniprog the target device 
      name appear to cortex m3.

      Now using PSoC Creator v2.0:

      It appear in the Select Debug Target window "Unknown Device

         

      Any help would be greatly appreciated.

         

      Thanks,Red