4 Replies Latest reply on Mar 22, 2013 6:40 AM by arvi

    Programming PSoC using Programmer on Windows 8

    arvi

      Here's the procedure to make your programmer work with Windows8-

         

      (Please post your queries in the original thread at http://www.cypress.com/?app=forum&id=2232&rID=74548)

         

       

         

      Programming PSoC using Programmer on Windows 8 - KBA85688

         

       

         

      Question: How to install PSoC Programmer and drivers on Windows 8?

         

      Answer:

         

       

         

      Kindly follow this procedure to program your PSoC device with Windows 8 OS:-

         

       

         

       

         

      1)      Upgrade your Programmer to 3.17 from the link “http://www.cypress.com/?rID=38050&source=header”.

         

       

         

       

         

      2)      This step is based on the type of OS:-

         

       

         

       

         

      a.      If your Windows is 32 bit then download “drivers_32bit.zip” file in your computer. Unzip this file and copy folder “drivers” at location “C:\Program Files\Cypress\Programmer\3.17\”.

         

       

         

      b.      If your Windows is 64 bit then download “drivers_64bit.zip” file in your computer. Unzip this file and copy folder “drivers” at location “C:\Program Files (x86)\Cypress\Programmer\3.17\”.

         

       

         

       

         

      3)      Go inside the folder “drivers” which you have copied and run the “driver.bat” file.

         

       

         

       

         

      4)      Plug-in MiniProg3 in the USB port of the PC, you should be able to see it in device manager.

         

       

         

       

         

      5)      And you will be able to program you devices now.