From your previous posts I am assuming that you are talking about PID problem in FX3 when you are using multiple ISOC packets.
The Knowledge based article that you were looking at is taling about FX2LP device. There is a bit field to set AADJ of EPxISOINPKTS register.
Please let me know if my assumption is correct.
Yes your assumption is correct. But i get this error with FX3, while using multiple ISOCH transmissions.
This is found using a USB anaylzer tool.
Is there any possible solution to this problem ?
Please let me know if the problem mentioned in this thread is different from the one below:
If yes, then please elaborate your problem.
As mentioned in the above thread i used the method of waiting for the consumer count to go to zero before reconfiguring the endpoint. It seemed to have work, but still when i use the analyzer tool i get this USBD_STATUS_XACT_ERROR , and after sometime fx3 seems to be hanged because of this , please provide a proper solution to this problem !!