Try contacting -
In email tell them part number, board number if cypress board, how you have
been programming in your normal development environment. Also ask for the
name and email address of local cypress field applications engineer (FAE)
and copy him.
Bob or Hli, do you know name/email of bay area FAE ?
Good luck, Dana
Also, in order to program you need to either have hex file of project archive,
as generated by tool. USB stick or on a LapTop. That means you also need
to know what compiler, version, Imagecraft or HiTech and what version of
PSOC Designer design was done in. The archive should take care
of that, but some knowlege may be necessary.
In Designer "File", "Project Archive", will generate the archive.
Would you mind to buy the programmer from the Cypress office directly? As you know ... [ Cypress Semiconductor - Northern California 198 Champion Court San Jose, CA 95134 USA Contact Jennifer Roloff - email@example.com ] ... I am from Japan, It's Sorry....
Bob and me are from Germany, so we are of no help here, I'm afraid. But I hope the other contacts here are suffiecient to help... (fingers crossed)