-
1. Re: DMA in cypress CY8C3866AXI-039
user_1377889 Jul 30, 2013 8:29 AM (in response to prajakta.zagade)Welcome in the fascinating world of PSoCs!
You need the Creator software (download for free from Cypress's website) to configure your PSoC3.
Set up an ADC and a DMA usermodule and study the datasheets. There is a DMA-wizard to help configuring the DMA.
Have you already got a development kit?
Bob
PS: This forum is for Clocks & Buffers. There is a PSoC3 forum where you may ask for further help.
-
2. Re: DMA in cypress CY8C3866AXI-039
user_1377889 Jul 30, 2013 8:35 AM (in response to prajakta.zagade)By the way: There are example projects covering both ADC and DMA, just click on "find example project" in Creator 2.2
Bob
-
3. Re: DMA in cypress CY8C3866AXI-039
prajakta.zagade Jul 31, 2013 3:45 AM (in response to prajakta.zagade)Hello all, Thank you for reply. I have already got material and started programming. I want to know the maximum operating frequency and maximum data transfer rate at which DMA works. This is regarding the IC not PSoC creator. Please guide me in DMA theory. Reply awaited. regards -
4. Re: DMA in cypress CY8C3866AXI-039
user_1377889 Jul 31, 2013 7:46 AM (in response to prajakta.zagade)On the top of this page is a "Keyword Search". When you enter "DMA" you will easily find the information in the listed articles you are searching for.
You are still in "Clocks & Buffers" forum, not in PSoC3! Will you please enter your next post in the correct place, responses will be faster and more accurate.
Bob