Problem with CX3 Configuration utility

[Anonymous]

There was a problem with the CX3 Configuration Utility in EZ USB Suite. I can not customize the project for MJPEG format. An error occurs:
ERROR: Suitable FIFO delay value can not be found. Use slower CSI clock speed and / or less data lanes and / or faster Output Pixel Clock.

   

A cycx3_uvcdscr.c file is not generated.

[Anonymous]

Hi,

   

You need to increase the value in Fifo Delay field, so that the Fifo Delay Time is between Min and Max values mentioned by the side of that field.

       

Regards,

   

Raghuram