1 Reply Latest reply on Sep 14, 2017 6:03 PM by lisz

    Regarding CCG1

    nikhil.patil.1

      Hi everyone, 

         

       

         

      I am a software engineer working on sw/hw project. I wish to use USB -C communication in my project. I am using a FT232 USB 2.0 USB to UART converter with a microcontroller to communicate with Android USB- C device. I wanted to know if

         

      1) I can provide power to android device if I use CCG-1. 

         

      2) CCG1 software provides several profiles like monitor laptop power cables etc. which one I should modify and how? 

         

      3) Do I need all client configuration Host configuration and connector configuration setup.  ?

         

       

         

      Thank you,

         

      Nikhil Patil

        • 1. Re: Regarding CCG1
          lisz

          Hi Nikhil,

           

          1) I can provide power to android device if I use CCG-1.

          >> Yes, you can provide power to Type-C device if you use CCGx. So far, for more easy to use, CCG2/3/4/5 is suitable for you.

           

          2) CCG1 software provides several profiles like monitor laptop power cables etc. which one I should modify and how?

          >> Notebook application or Power Adapter application is Okay for you.

           

          3) Do I need all client configuration Host configuration and connector configuration setup.  ?

          >> You need to know the client's sink PDO at least.

           

          Best Regards,

          Lisa