1) Are you getting the same problem with all the firmware, or only one particular firmware is not building?
2) Have you make sure that you selected "copy to workspace" while importing the project ?
3) I suppose you are using Windows. Please go through the attached application note which shows how to import and build existing projects. Please refer section 8 of the AN75705 http://www.cypress.com/documentation/application-notes/an75705-getting-started-ez-usbr-fx3tm-zh
Hi, the best thing is to add a final step to any makefiles you are using for your project(s), as shown below. In this case 'make' will expect the elf2img utility to be available. elf2img itself is generally found in the util/elf2img folder of the FX3 SDK. HTH.
compile: $(C_OBJECT) $(A_OBJECT) $(EXES) # add the step necessary to create an img file ../elf2img/elf2img -i $(MODULE).elf -o $(MODULE).img
It seems the problem only happens when I try to generate image file for project AN75705. I tried some examples in the files and there is no problem.