the PSoC 4 Firmwarezip for CY8C4245AXI-483 cannot change the device  for  CY8C4125AXI-483

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

HI, I change the the device for PSoC 4 Firmware.zip  from the  CY8C4245AXI-483 to the  CY8C4145AXI-483.I rebuild the project ,have many error.I has buyed the CY8C4145AXI-483, Can you give us the correct file of the PSoC 4 Firmware.zip for the CY8C4145AXI-483,I use  two days  but didn't change it to be good.My mail:705486026@qq.com,I thank you  very much! The Below is the error an your web. 

0 Likes
1 Solution
Anonymous
Not applicable

1) You need to change the device that the bootloader is targeting from CY8C4245AXI-483 to CY84125AXI-483.

   

2) Your clock for SYCLK is too big; The CPU can only handle 24 MHz.

   

3) There is a warning for your UART RX clock being slightly off from tolerance, but probably acceptable.

   

4) cy_boot components prior to v4.2 may be unable to wake up from sleep/deep sleep due to defect.

   

5) It seems like a clock component under your SCB_P4_v99_0 component is broken from and older version port?

View solution in original post

0 Likes
8 Replies
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received
        Please post your code so we can check it by selecting file In Psoc Creator then select create workspace bundle attach that file to a new post.   
0 Likes
Anonymous
Not applicable

hi,Thank you,This is my project for CY8C4145AXI-483.My mail:705486026@qq.com

0 Likes
Anonymous
Not applicable

1) You need to change the device that the bootloader is targeting from CY8C4245AXI-483 to CY84125AXI-483.

   

2) Your clock for SYCLK is too big; The CPU can only handle 24 MHz.

   

3) There is a warning for your UART RX clock being slightly off from tolerance, but probably acceptable.

   

4) cy_boot components prior to v4.2 may be unable to wake up from sleep/deep sleep due to defect.

   

5) It seems like a clock component under your SCB_P4_v99_0 component is broken from and older version port?

0 Likes
Anonymous
Not applicable

HI,e.pratt_1639216,I want to need myFirmware.zip for  CY8C4145AXI-483,but donnot need your  advice。The  advice had Already knowed by us,we donn't know how to change and caonnot find the error place. Pratt_1639216,if you donnot how to do,we think you not to answer,if you know how to do,please directly give me the myFirmware.zip for  CY8C4145AXI-483,I thank you very much.

0 Likes
Anonymous
Not applicable

Ну, если вы хотите, чтобы кто-то выполнял вашу работу за вас, я бы рекомендовал нанять нового инженера для этой должности. В противном случае я собираюсь дать указатели, а не выполнять эту работу за вас.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Politeness is like an echo...

   

 

   

Bob

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Hey, e.pratt, I've heard from an American in Paris, but not yet in Russia 😉

   

 

   

Bob

0 Likes
Anonymous
Not applicable

Lol, I used to live close to Russia 😉

   

Currently living in US though.

0 Likes