What voltage are you using for your PSOC 5 lp if it is 5 volts you could read the sensor with out any issues. Please post your code or give us the Sensor part number so we can determine what would be the best way to measure the device.
I just read about the 5V compatibility of the PSOC5 LP and it's worth exploring. My sensor uses a few 5V level digital control pins, and an analog signal with 4.5V range.
I use this board, mikromedia for PSoC 5LP, the datasheet doesn't have much information to talk about. From the datasheet I can't figure out whether I can apply 5V through at the battery connector. Are you able to help me on that?
It's an expensive board to test on. :)
1 of 1 people found this helpful
Voltage range: 1.71 to 5.5 V