This content has been marked as final. Show 4 replies
I'm not sure about CY8C20436a and
I didn't get your composition of CSD and ADCINC.
If you upload the project, someone will help you.
When uploading, use without Chrome for browser.
Consider posting a tech case at -
"Create a Case"
I see minimal info in TRM on ADCINC, furthermore no reference to any
interaction of Capsense and ADCINC in CSD chapter.
I'll try to explain the problem better. Using the cy8c20436a I am trying to read a thermister on P3.1 while also using the CSD module. I am able to get the ADC to read the thermister correctly and measure the voltage with a meter on the input pin without the CSD module placed in the project. I then place the CSD module and assign one capsense button but do not start the CSD module. After building and programming the project I no longer read the correct value on the ADCINC pin and measure 0V on that pin. It seems as though something is pulling down that pin when the CSD module is placed.
ADC_Problem.txt.zip 1,006 bytes
total configuration is informative, through
I can't get any clue from the text
even more, I can't create 8C20436a project
Anyway, Did you use or see this Kit that contain 20436 CSD?
There are Example.zip and Setup only package.
That would be more helpful.
[ http://www.cypress.com/?rID=38222 ]
CY3280-20x66 Universal CapSense Controller Kit .