1 Reply Latest reply on Oct 20, 2013 12:05 PM by JoMe_264151

    Sample/Track & Hold problem

      Did peak detector on the component subject. We must remember the amplitude of the square pulse duration > 10us.


      The component has configured as follows.


      - "Sample & Hold"


      - "Internal"


      - "Falling edge"


      Synchronized pulse from the Pulse Converter component, 2us, who was started by digital sygnal under investigation immediately.


      On output of Sample & Hold I was see clear 0!


      P.S. In main.c component was started, not forgot to do this...