- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
When I compile my project with PSoC creator 3.0,there are notes that may indicate some problems:
"apr.M0002:Analog signal ... is connected to one terminal only."
The signal is internal to the ADC.
Will it affect the project's functionality?
Ans:
This will not cause any issues with the functionality. There is a mux before Del-Sig ADC to select between the internal and external reference. Since we are using only the internal reference, one input to the AMux will be left unconnected.
Hence, it shows that analog signal is connected to only one terminal.
This will be corrected in the future versions of the component.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This note is considered as required, so no change is planned to be implemented.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
This still has not been corrected. The Del-Sig ADC component still reports this note
Regards,
Ron
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This note is considered as required, so no change is planned to be implemented.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This will not cause any issues with the functionality. Contoh Lamaran Kerja There is a mux before Del-Sig ADC to select between the internal and external reference.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This still happens in PSoC Creator 4.2 (4.2.0.641) with ADC_DelSig v3.30
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It also happens with the Sequencing SAR ADC for PSoC 5LP in Creator 4.2 (4.2.0.641)