Warnings (sometimes even errors) flagged in the code-editor for a PSoC3 are better taken as a hint only. Warnings (and errors) from the build-step are to be taken seriously and should be avoided.
Where do your warnings pop up?
It shows as a small yellow triangle with an " ! " mark in it just to the left of the line number in the grey shaded column.
Yes, this are often errorneous warnings, will be changed with next version. Stick to the build-report.
Thanks. That is good to know. I will look to see it go away in the next creator revision.
This also brings up another question I have. If i need to repost it in another thread then let me know. It is also regarding a warning but this one is in my "Notice List" tab, (see screen shot below). It reads I have an interrupt clock tolerance issue with a uart block. I'm targeting a rate of 38400 bits/second. How can i get the tolerance in sync wtih my timing needs with making changes that will affect other parts of my application?
This error, in general, means something in the clock chain does not meet
design settings or criteria.
Post a project archive and forum can assist you -
"Create Workspace Bundle"
Use Internet Explorer or Firefox to post, Chrome does not seem to work.