DC Jack not working for Eval1 board

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

The documentation for the eval 1 board states: 
"The power supply system on this board is versatile. The kit can be powered in three ways: using a

   
    MiniProg unit, DC wall adaptor, or a 9-V battery. The DC wall adaptor must be of 9 V to 12 V, 1-A   
   
    rating unit. The onboard voltage regulator converts input 9 V/12 V into 3.3 V/ 5 V"    
    
I have a 9V, 1.5A dc wall adapter. I plug it into the board and no voltage is showing between vcc and gnd. Any idea why? Am I missing something?   
0 Likes
1 Reply
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

See               http://www.cypress.com/?app=forum&id=1573&rID=93246 for answer.

   

 

   

One other test not mentioned, check adapter output is good with a DVM.

   

 

   

Regards, Dana.

0 Likes