2 Replies Latest reply on May 22, 2014 5:55 PM by jota_1939431

    CONFUSED TAG3 HARDWARE  HELP PLEASE!!!

    JoFo_1316796

      Hi Broadcom,

      I just want the schematic netlist and the PCB layout source for the TAG3 board that supposedly works with your 2.0SDK so I can layout my board using your example as my example.  I sure would like to buy some chips and send businss your way.

       

       

      I am confused and way behind schedule and can't seem to get any help.

       

      Your hardware reference document for your "TAG3" board that works with the 2.0 SDK (allegedly) seems to be in conflict.

       

      I received a board in the mail from your distributors which looks like this:

      Screen Shot 2014-05-22 at 5.38.33 PM.png

       

      Then in your document I see this:

      Screen Shot 2014-05-22 at 5.38.41 PM.png

       

      Please note that the board I received in the mail is marked with the PN:  BCM920732TAG_Q32

      The layout files appear to have this PN on them:  BCM920737TAG

       

       

      What is going on???

       

       

      I just want the schematic netlist and the PCB layout source so I can layout my board using your example as my example.  I sure would like to buy some chips and send businss your way.

       

      I have received a PCB file without a schematic netlist for some other board which does not remotely resemble the TAG3 in the SDK documentation.

       

       

      Help me please???

       

       

      Thank You,

      JB.