This discusses PROTO implementation -
http://www.cypress.com/?rID=38267 AN54460 - PSoC® 3, PSoC 4, and PSoC 5LP Interrupts
Alternatively post your project for forum to look at -
“Create Workspace Bundle”
Use Firefox or IE, not chrome to post.
The CY_ISR_PROTO(Handler) macro only declares your interrupt handler, later on you have to DEFINE it with
// Handler Body
I found the original problem. needed to link the files.
However there is another problem. Here is a simple program using 2 timers to flash 2 led's using interrupts. Only one will flash even thou the code is exactly the same for each one. Ive had this problem before using multiple interrupts so I usually just poll.
This is on the CY8CKIT-050 kit.
Design08.Bundle01.zip 1.4 MB
Change this -
to this -
Hi Dana. Yes, found it myself just as soon as I posted...