1 2 Previous Next 20 Replies Latest reply on Mar 1, 2020 8:58 PM by BoTa_264741

    myEEPROM: component to save/recall application settings in EEPROM between power offs




      almost every application requires to save and recall some custom settings in EEPROM between power off. Attached is simple component which accomplishes just that. All you need to do is declare some structure to hold application settings and to initialize component. Demo project attached. Tested with PSoc5LP (Creator 3.0).


      Several options available:  CRC8 check upon recall,   variable CRC seed value (can change for different apps),  variable EEPROM start address (can use multiple instances of the component to save several buffers),   Temperature check for operation in adverse conditions.





      RealTerm output.PNG

        1 2 Previous Next