2 Replies Latest reply on Jan 28, 2015 12:32 AM by shashank.rebbapragada

    Looking for a firmware example using four endpoints (Sync. FIFO on a FPGA)

    jacob.van.der.woude

           Hi!

         

                     

         

       

         

      For our design using a FX3 I am looking for a FX3 firmware example using 4 endpoints.

         

      The GPIF II interface is used as a sync. FIFO interface were the FPGA is the master.

         

      The GPIF designer contains a predefined project for this. (sync_slave_fifo_2bit)

         

      The SDK also has a predefined project (SlaveFifoSync), but it seems to only support two endpoints.

         

       

         

      Is there a firmware example using four endpoints?

         

      Or is the predefined project easily adapted by just creating two additional endpoints?

         

       

         

      With regards,

         

      Jacob