8 Replies Latest reply on May 20, 2015 10:20 AM by DaKn_263916

    Bypass digital BiSS signal trough PSoC5LP

      Hallo Community,


      I currently trying to bypass a digtial signal trough the PSoC5. I attached an image to clearify the configuration.


      The pins 2 and 4 transfer the clock signal of an external BiSS interface which is set to 2 MHz and Pin 3 and 6 shall transfer data. Pin 2 and 3 are connected to an external Biss-Interace and pin 4 and 6 are connected to a sensor.


      But it does not work. I can not set up a connection. My question is: What may causes the problem? Could the internals of the PSoC destroy the signal or slow down the clock signal?


      I checked if bypassing is possible with analog pins and it worked.


      Best regards,